Bridges - Prowler Productions

  Prowler Productions
  Dink Smallwood Forum
  Bridges

profile | register | faq

Author Topic:   Bridges

Duck posted 01-16- 09:46 PM CT (US)
How do I make a bridge work? I looked at the original game, then tried to remove the hardness at the edge of the screen, but none of it has worked. Any help is appreciated..
Thanks
bdjnk posted 01-16- 11:55 PM CT (US)
When you are in tile edit mode (where the square box is on the screen, not the blue sprite arrow) press the H key to enter hardness edit mode. In hardness edit mode, you can use the [ and ] keys to run through the available tile hardnesses. Pick one that closely matches what you need, and use S to stamp it down. Be careful not to edit any of the hardness blocks you select this way, because they belong to the tiles on the various tile pages and you could accidentally mess one up without meaning to. (Seth used this method for the bridges)
Wyndo posted 01-17- 11:38 AM CT (US)
I remember using it a lot too. Did I remember to put that in the FAQ?
Wyndo posted 01-17- 11:43 AM CT (US)
I remember using it a lot too. Did I remember to put that in the FAQ?
Duck posted 01-17- 06:29 PM CT (US)
I haven't seen it in the FAQ Wyndo... Great job on it though =)
Beuc posted 01-18- 01:14 AM CT (US)
Wyndo, I've already said it, but in addition to the 'H' hardness (you really need to add it, it's written nowhere, and I found it typing every keys...), you can also add the fact that the dink palette is TILE-01.bmp and not Splash.bmp :)
Wyndo posted 01-18- 04:06 PM CT (US)
OK I'll email myself a reminder about that.
Wyndo posted 01-18- 04:09 PM CT (US)
Hmm, the "H" command with [ and ] to pick is already in the FAQ it seems... Question #14.
http://www.prowler-pro.com/dmods/dmod-faq.html#Q014
Maybe it wasn't noticed because the question was "removing" hardness to allow for bridges, and I explained this in a section about "adding" hardness to block around houses... but there it is, already there. :)
Duck posted 01-18- 08:25 PM CT (US)
Thanks everyone! After some experimenting, I got it down =)

Hop to:

Contact Us | Prowler Productions

Powered by: Ultimate Bulletin Board, Freeware Version 5.10a
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Bridges
Duck	posted 01-16- 09:46 PM CT (US) How do I make a bridge work? I looked at the original game, then tried to remove the hardness at the edge of the screen, but none of it has worked. Any help is appreciated.. Thanks
bdjnk	posted 01-16- 11:55 PM CT (US) When you are in tile edit mode (where the square box is on the screen, not the blue sprite arrow) press the H key to enter hardness edit mode. In hardness edit mode, you can use the [ and ] keys to run through the available tile hardnesses. Pick one that closely matches what you need, and use S to stamp it down. Be careful not to edit any of the hardness blocks you select this way, because they belong to the tiles on the various tile pages and you could accidentally mess one up without meaning to. (Seth used this method for the bridges)
Wyndo	posted 01-17- 11:38 AM CT (US) I remember using it a lot too. Did I remember to put that in the FAQ?
Wyndo	posted 01-17- 11:43 AM CT (US) I remember using it a lot too. Did I remember to put that in the FAQ?
Duck	posted 01-17- 06:29 PM CT (US) I haven't seen it in the FAQ Wyndo... Great job on it though =)
Beuc	posted 01-18- 01:14 AM CT (US) Wyndo, I've already said it, but in addition to the 'H' hardness (you really need to add it, it's written nowhere, and I found it typing every keys...), you can also add the fact that the dink palette is TILE-01.bmp and not Splash.bmp :)
Wyndo	posted 01-18- 04:06 PM CT (US) OK I'll email myself a reminder about that.
Wyndo	posted 01-18- 04:09 PM CT (US) Hmm, the "H" command with [ and ] to pick is already in the FAQ it seems... Question #14. http://www.prowler-pro.com/dmods/dmod-faq.html#Q014 Maybe it wasn't noticed because the question was "removing" hardness to allow for bridges, and I explained this in a section about "adding" hardness to block around houses... but there it is, already there. :)
Duck	posted 01-18- 08:25 PM CT (US) Thanks everyone! After some experimenting, I got it down =)