I gots the scripting going ok but dinkedit is a ***** plz help me with warps!

  Prowler Productions
  Dink Smallwood Forum
  I gots the scripting going ok but dinkedit is a ***** plz help me with warps!

profile | register | faq

Author Topic:   I gots the scripting going ok but dinkedit is a ***** plz help me with warps!

dark wolf shadow hunter posted 05-20- 01:20 PM CT (US)
I cant get any of my warps to work i've used the "Official Dink author's FAQ" and done everything it says there step by step but it still wont work... i seriously need some help here... like i think it might be my hardness but i dont understand that... I really really need some help so i hope someone here can lay it out for me..
FF4LIFE posted 05-21- 03:12 PM CT (US)
The warping is a little confusing at first, but after that its easy. You need to change the warp to one (I think its by pressing 0 on a sprite) Then to tell it where to warp to move your curser over the spot and hit alt-w. Then pick up the warping sprite and hit alt-w again. Both times it makes a funny sound. To make sure its going to warp, hit spacebar and it should be red.
dark wolf shadow hunter posted 05-22- 04:15 PM CT (US)
i did everything just like you said and it still wont work... is there nething else that i missed...
FF4LIFE posted 05-22- 08:51 PM CT (US)
I don't think i missed anything. Why don't you tell me what you did step by step, then I can see what you did wrong.
dark wolf shadow hunter posted 05-23- 12:13 PM CT (US)
1)insert the house sprite
2)insert the door sprite
3)I created the room i want to warp to
4)i change the door's warp thingy to 1
5)i go to the room i want to warp to and enter sprite edit mode put it over the place i wanna warp to and press alt+w
6)i go to the door and pick it up and press alt+w
7)hold down space to see that there's no orange/red there...
Nexis posted 05-24- 04:39 AM CT (US)
Does the sprite have hardness?
dark wolf shadow hunter posted 05-24- 03:41 PM CT (US)
I dont know... i said on the first post i thought the hardness might be the problem but i dont even know how to get one of htose "hard box" thingys... that's why i need your help
Nexis posted 05-25- 04:55 AM CT (US)
Here's a line from mike's dmod faq:
9: Set the hardness. 0=hard, 1=not hard.
So just press the 9 key after clicking on a sprite and give it a 0 so that it will be hard.
dark wolf shadow hunter posted 05-25- 10:32 PM CT (US)
THANK YOU!!!! I got it!!!

Hop to:

Contact Us | Prowler Productions

Powered by: Ultimate Bulletin Board, Freeware Version 5.10a
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: I gots the scripting going ok but dinkedit is a * plz help me with warps!
dark wolf shadow hunter	posted 05-20- 01:20 PM CT (US) I cant get any of my warps to work i've used the "Official Dink author's FAQ" and done everything it says there step by step but it still wont work... i seriously need some help here... like i think it might be my hardness but i dont understand that... I really really need some help so i hope someone here can lay it out for me..
FF4LIFE	posted 05-21- 03:12 PM CT (US) The warping is a little confusing at first, but after that its easy. You need to change the warp to one (I think its by pressing 0 on a sprite) Then to tell it where to warp to move your curser over the spot and hit alt-w. Then pick up the warping sprite and hit alt-w again. Both times it makes a funny sound. To make sure its going to warp, hit spacebar and it should be red.
dark wolf shadow hunter	posted 05-22- 04:15 PM CT (US) i did everything just like you said and it still wont work... is there nething else that i missed...
FF4LIFE	posted 05-22- 08:51 PM CT (US) I don't think i missed anything. Why don't you tell me what you did step by step, then I can see what you did wrong.
dark wolf shadow hunter	posted 05-23- 12:13 PM CT (US) 1)insert the house sprite 2)insert the door sprite 3)I created the room i want to warp to 4)i change the door's warp thingy to 1 5)i go to the room i want to warp to and enter sprite edit mode put it over the place i wanna warp to and press alt+w 6)i go to the door and pick it up and press alt+w 7)hold down space to see that there's no orange/red there...
Nexis	posted 05-24- 04:39 AM CT (US) Does the sprite have hardness?
dark wolf shadow hunter	posted 05-24- 03:41 PM CT (US) I dont know... i said on the first post i thought the hardness might be the problem but i dont even know how to get one of htose "hard box" thingys... that's why i need your help
Nexis	posted 05-25- 04:55 AM CT (US) Here's a line from mike's dmod faq: 9: Set the hardness. 0=hard, 1=not hard. So just press the 9 key after clicking on a sprite and give it a 0 so that it will be hard.
dark wolf shadow hunter	posted 05-25- 10:32 PM CT (US) THANK YOU!!!! I got it!!!